Abstract
Improving semiconductor equipment and components is an important goal of semiconductor manufacture. Especially during the deposition process, the temperature of the wafer must be precisely controlled to form a uniform thin film. In the conventional plasma-enhanced chemical vapor deposition (PECVD) chuck, heating rate, and temperature uniformity are limited by the spiral pattern and volume of the heating element. To overcome the structural limitation of the heating element of conventional chuck, we tried to develop the planar heating chuck (PHC), a 6-inch PECVD chuck with a planar heating element based on NiCr thin film that would be a good candidate for rapidly and uniformly heating. The time for the temperature elevation from room temperature to 330 °C was 398 s. In a performance evaluation, the fabricated PHC successfully completed a SiO2 PECVD process.
Subject
Electrical and Electronic Engineering,Computer Networks and Communications,Hardware and Architecture,Signal Processing,Control and Systems Engineering
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献