Microstructure, Mechanical Properties and Deformation Behavior of Fe-28.7Mn-10.2Al-1.06C High Specific Strength Steel

Abstract

The microstructure, properties and deformation behavior of Fe-28.7Mn-10.2Al-1.06C high specific strength steel were studied. The results showed that the density of experimental steel is about 6.59 g/cm3 and the microstructure is austenite. With the increase in the annealing temperature, the tensile strength decreases and the elongation increases. When the annealing temperature is 950 °C, the strength-plastic product of the experimental steel is 54.82 GPa%, and the specific strength is 1.48 × 105 N·m/kg. Compared with 20Mn2CrNb high strength automobile steel, the specific strength of laboratory steel is increased by more than 20%. The deformation behavior of experimental steel is mainly: At the low strain, spacing of slip surface decreases; at high strain, dislocation walls and micro-strips are formed, and the austenite grains are segmented, increasing the dislocation density and starting more secondary slips.