Velocity Profile Representation for Fully Developed Turbulent Flows in Pipes: A Modified Power Law

Abstract

In the design practices of many engineering applications, gross information about the flow field may suffice to provide magnitudes of the parameters that are essential to complete the design with reasonable accuracy. If such design parameters can be estimated following simpler steps, it may be possible to abandon the need to conduct expensive numerical and/or experimental works to produce them. In this work, we are interested in providing a generalized power law that depicts the velocity profile for fully developed turbulent flows. This law incorporates two fitting parameters m and n that represent the exponents of (1) a nondimensional length scale and (2) an overall exponent, respectively. These two parameters may be determined by fitting the experimental and/or computational data. In this work, fitting benchmark experimental and computational fluid dynamics (CFD) data found in the literature reveals that the parameter m changes over a relatively smaller range (between 1 and 2), while the parameter n changes over a wider range (between 1 and 12 for the range of Reynolds number considered). These two parameters (m and n) are, generally, not universal, and they depend on the Reynolds number (Re). A correlation was also developed to correlate n and Re in the turbulent flow region. In order to preserve the continuity of the derivative of the velocity profile at the centerline, a value of m equals 2 over the whole range of Re is recommended. Apart from the near wall area, the new law fits the velocity profile reasonably well. This generalized law abides to a number of favorable stipulations for the velocity profile, namely the continuity of derivatives and reduction to the laminar flow velocity profile for lower values of Re.