Potential of 3D printing technologies for fabrication of electron bolus and proton compensators-Reference-Cited by-同舟云学术

Potential of 3D printing technologies for fabrication of electron bolus and proton compensators

Published:2015-05 Issue:3 Volume:16 Page:90-98
ISSN:1526-9914
Container-title:Journal of Applied Clinical Medical Physics
language:en
Short-container-title:Journal of Applied Clinical Medical Physics

Author:

Zou Wei¹,Fisher Ted²,Zhang Miao¹,Kim Leonard¹,Chen Ting¹,Narra Venkat¹,Swann Beth¹,Singh Rachana¹,Siderit Richard³,Yin Lingshu⁴,Teo Boon-keng Kevin⁴,Mckenna Michael¹,McDonough James⁴,Ning Yue J.¹

Affiliation:

1. Department of Radiation Oncology; Rutgers Cancer Institute of New Jersey; New Brunswick NJ USA

2. Department of Radiation Oncology; Community Cancer Care; Missoula MT USA

3. Department of Pathology; Rutgers Cancer Institute of New Jersey; New Brunswick NJ USA

4. Department of Radiation Oncology; University of Pennsylvania; Philadelphia PA USA

Publisher

Wiley

Subject

Radiology, Nuclear Medicine and imaging,Instrumentation,Radiation

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1120/jacmp.v16i3.4959/fullpdf

Reference26 articles.

1. Utilization of custom electron bolus in head and neck radiotherapy;Kudchadker;J Appl Clin Med Phys.,2003

2. Image-guided bolus electron conformal therapy - a case study;Zeidan;J Appl Clin Med Phys.,2010

3. Computer-aided design and fabrication of an electron bolus for treatment of the paraspinal muscles;Low;Int J Radiat Oncol Biol Phys.,1995

4. A custom three-dimensional electron bolus technique for optimization of postmastectomy irradiation;Perkins;Int J Radiat Oncol Biol Phys.,2001

5. Bolus electron conformal therapy for the treatment of recurrent inflammatory breast cancer: a case report;Kim;Med Dosim.,2012

Cited by 63 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The application of 3D printing technology in tumor radiotherapy in the era of precision medicine;Applied Materials Today;2024-10

2. Characterisation of 3D-printable thermoplastics to be used as tissue-equivalent materials in photon and proton beam radiotherapy end-to-end quality assurance devices;Biomedical Physics & Engineering Express;2024-09-05

3. Self‐Crosslinking AuNPs Composite Hydrogel Bolus for Radiophotothermal Therapy;Macromolecular Rapid Communications;2024-07-29

4. Technical note: A comparison of in‐house 3D‐printed and commercially available patient‐specific skin collimators for use with electron beam therapy;Journal of Applied Clinical Medical Physics;2024-04-26

5. Additive manufacturing of patient specific bolus for radiotherapy: large scale production and quality assurance;Physical and Engineering Sciences in Medicine;2024-01-29