Relationship between Slipperiness and Other Characteristics of Stones used as Flooring Slabs-Reference-Cited by-同舟云学术

Relationship between Slipperiness and Other Characteristics of Stones used as Flooring Slabs

Published:2016-08 Issue:8 Volume:28 Page:04016049
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Bellopede Rossana¹,Marini Paola²,Karaca Zeki³,Gökçe Mehmedi Vehbi⁴

Affiliation:

1. Assistant Professor, Dept. of Environment, Politecnico di Torino, Land and Infrastructure Engineering, 10129 Torino, Italy (corresponding author).

2. Assistant Professor, Dept. of Environment, Politecnico di Torino, Land and Infrastructure Engineering, 10129 Torino, Italy.

3. Associate Professor, Dept. of Mining Engineering, Canakkale Onsekiz Mart Univ., Canakkale 17020, Turkey.

4. Assistant Professor, Faculty of Architecture, Dept. of Architecture, Niğde Univ., Niğde 51000, Turkey.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0001556

Reference32 articles.

1. ANSI/NFSI (Accredited Standard Developer/National Floor Safety Institute). (2012). “Test method for measuring wet DCoF of common hard-surface floor materials (including action and limit thresholds for the suitable assessment of the measured values).” ANSI/NFSI B101.3 Southlake.

2. AS/NZS (Australian and New Zealand Standard). (1993). “Slip resistance of pedestrian surfaces.” AS/NZS 3661.1: Part 2 Sidney Australia and Wellington New Zealand.

3. AS/NZS (Australian and New Zealand Standard). (2013). “Slip resistance classification of new pedestrian surface materials.” AS/NZS 4586 Sidney Australia and Wellington New Zealand.

4. ASTM. (2013). “Standard test method for measuring surface frictional properties using the british pendulum tester.” ASTM E303 West Conshohocken PA.

5. BSI (British Standard). (2013a). “Method of calibration—Specifications.” BS 7976: Part 2 London.

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Current state-of-the art review of footwear-ground friction;Friction;2024-08-14

2. High Skid-Resistant Pavements: The Effect of Gritting Parameters;International Journal of Civil Engineering;2024-03-30

3. Site Assessment of Surface Texture and Skid Resistance by Varying the Grit Parameters of an SMA;Journal of Transportation Engineering, Part B: Pavements;2022-09

4. What Makes a Floor Slippery? A Brief Experimental Study of Ceramic Tiles Slip Resistance Depending on Their Properties and Surface Conditions;Materials;2021-11-21

5. Comparative Analysis of Slip Resistance Test Methods for Granite Floors;Materials;2021-02-27