Experimental Study on Contact Erosion Failure in Pavement Embankment with Dispersive Clay-Reference-Cited by-同舟云学术

Experimental Study on Contact Erosion Failure in Pavement Embankment with Dispersive Clay

Published:2016-04 Issue:4 Volume:28 Page:04015179
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Premkumar S.¹,Piratheepan J.²,Arulrajah A.³,Disfani M. M.⁴,Rajeev P.⁵

Affiliation:

1. Ph.D. Student, Swinburne Univ. of Technology, Melbourne, VIC 3122, Australia.

2. Lecturer, Faculty of Science, Engineering and Technology (H38), Swinburne Univ. of Technology, P.O. Box 218, Hawthorn, Melbourne, VIC 3122, Australia (corresponding author).

3. Associate Professor, Swinburne Univ. of Technology, Melbourne, VIC 3122, Australia.

4. Lecturer, School of Engineering, Univ. of Melbourne, Melbourne, VIC 3010, Australia.

5. Senior Lecturer, Swinburne Univ. of Technology, Melbourne, VIC 3122, Australia.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0001452

Reference55 articles.

1. Aitchison G. and Wood C. (1965). “Some interactions of compaction permeability and post-construction deflocculation affecting the probability of piping failure in small earth dams.” Proc. 6th Int. Conf. on Soil Mechanics and Foundation Engineering Univ. of Toronto Press Montreal 2 442–446.

2. ASTM. (2000a). “Standard test method for dispersive characteristics of clay soil by double hydrometer.” ASTM D4221-99 West Conshohocken PA.

3. ASTM. (2000b). “Standard test method for identification and classification of dispersive clay soils by the pinhole test.” ASTM D4647-93 West Conshohocken PA.

4. ASTM. (2000c). “Standard test method for pore water extraction and determination of the soluble salt content of soils by refractometer.” ASTM D4542-95 West Conshohocken PA.

5. ASTM. (2000d). “Standard test methods for determining dispersive characteristics of clayey soils by the crumb test.” ASTM D6572-12 West Conshohocken PA.

Cited by 36 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Investigating the efficacy of nanoclay particles in controlling the contact erosion behavior of dispersive clays;Bulletin of Engineering Geology and the Environment;2024-09-06

2. Micromechanical analysis of contact erosion under cyclic loads using the coupled CFD–DEM method;Géotechnique;2024-07-19

3. The role of soil dispersivity and initial moisture content in splash erosion: Findings from consecutive single-drop splash tests;Biosystems Engineering;2024-07

4. The potential of NAA and ICP-MS for determining soil dispersibility in relation to landslide incidents;IOP Conference Series: Materials Science and Engineering;2024-05-01

5. A new method for preventing sidewall preferential flow in the internal erosion simulation using un-resolved CFD–DEM;Acta Geophysica;2024-01-23