Adhesion Quality of Chip Seals: Comparing and Correlating the Plate-Stripping Test, Boiling-Water Test, and Energy Parameters from Surface Free Energy-Reference-Cited by-同舟云学术

Adhesion Quality of Chip Seals: Comparing and Correlating the Plate-Stripping Test, Boiling-Water Test, and Energy Parameters from Surface Free Energy

Published:2019-03 Issue:3 Volume:31 Page:04018401
ISSN:0899-1561
Container-title:Journal of Materials in Civil Engineering
language:en
Short-container-title:J. Mater. Civ. Eng.

Author:

Alvarez Allex E.¹,Espinosa Leidy V.²,Perea Asmirian M.²,Reyes Oscar J.³,Paba Ivan J.⁴

Affiliation:

1. Professor, Program of Civil Engineering, Universidad del Magdalena, Santa Marta 470002, Colombia (corresponding author).

2. Civil Engineer, Program of Civil Engineering, Universidad del Magdalena, Santa Marta 470002, Colombia.

3. Professor, Program of Civil Engineering, Universidad Militar Nueva Granada, Bogotá D.C. 110111 Colombia.

4. Operations Manager, Incoasfaltos S.A.S., Mosquera 250047, Colombia.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29MT.1943-5533.0002603

Reference30 articles.

1. Addressing Raveling Resistance in Chip Seal Specifications

2. Characterization of Aggregate Surface Energy Using the Universal Sorption Device

3. Surface Free Energy to Identify Moisture Sensitivity of Materials for Asphalt Mixes

4. Cheng D. 2002. “Surface free energy of asphalt-aggregate systems and performance analysis of asphalt concrete based on surface free energy.” Ph.D. dissertation Dept. of Civil Engineering Texas A&M Univ.

5. Evaluation of Fatigue Cracking in Asphalt Mixtures Based on Surface Energy

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Evaluation of the electrochemical interaction in the asphalt emulsion-aggregate system of cold mix asphalt through zeta potential and surface free energy analysis;International Journal of Pavement Engineering;2024-06-10

2. Adhesion of Nano-ZnO Modified Asphalt and Its Influence on Moisture-Sensitive Properties of Mixtures;Advances in Materials Science and Engineering;2023-04-19

3. Assessment of methods to select optimum doses of rejuvenators for asphalt mixtures with high RAP content;International Journal of Pavement Engineering;2023-02-06

4. Optimizing the Dose of Warm-Mix Asphalt Additives by Maximizing the Asphalt-Aggregate Adhesion Measured via Surface-Free Energy;Journal of Materials in Civil Engineering;2023-02

5. Quantitative evaluations on influences of aggregate surface texture on interfacial adhesion using 3D printing aggregate;Construction and Building Materials;2022-04