Development of Welding Emission Factors for Cr and Cr(VI) with a Confidence Level-Reference-Cited by-同舟云学术

Development of Welding Emission Factors for Cr and Cr(VI) with a Confidence Level

Published:2009-05 Issue:5 Volume:59 Page:619-626
ISSN:1096-2247
Container-title:Journal of the Air & Waste Management Association
language:en
Short-container-title:Journal of the Air & Waste Management Association

Author:

Serageldin Mohamed¹,Reeves David W.²

Affiliation:

1. a U.S. Environmental Protection Agency , Office of Air Quality Planning and Standards , Research Triangle Park , NC , USA

2. b Research Triangle Institute International , Research Triangle Park , NC , USA

Publisher

Informa UK Limited

Subject

Management, Monitoring, Policy and Law,Waste Management and Disposal

Link

https://www.tandfonline.com/doi/pdf/10.3155/1047-3289.59.5.619

Reference12 articles.

1. Sullivan, M. Welding Fume Study; National Steel and Shipbuilding Company: San Diego, CA, 2003.

2. Development of Particulate and Hazardous Emission Factors for Electric Arc Welding; AP-42, Section 12.19; Revised Final Report; U.S. Environmental Protection Agency: Research Triangle Park, NC, 1994; pp 2.1–2.32.

3. Guide for Estimating Welding Emissions for U.S. Environmental Protection Agency (EPA) and Ventilation Permit Reporting; AWS F1.6; American Welding Society: Miami, FL, 2003.

4. Compilation of Air Pollutant Emission Factors: Development of Particulate and Hazardous Emission Factors for Electric Arc Welding; Table 4-15, AP-42, Section 12-19; Revised Final Report; U.S. Environmental Protection Agency: Research Triangle Park, NC, 1994; pp 421-422.

5. Kura, B. Evaluation of Cr(6) Exposure Levels in the Shipbuilding Industry, Final Report; Gulf Coast Region Maritime Technology Center; University of New Orleans: New Orleans, LA, 1988.

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Review of welding fume emission factor development;Annals of Work Exposures and Health;2023-05-16

2. Calibration of the Welding Advanced REACH Tool (weldART);International Journal of Hygiene and Environmental Health;2020-06

3. Fume Formation Rate Analysis of Shipbuilding Steel with SMAW Using Taguchi Design and ANOVA;Acta Physica Polonica A;2017-03

4. Unanticipated potential cancer risk near metal recycling facilities;Environmental Impact Assessment Review;2013-07

5. Control of Cr⁶⁺ Emissions from Gas Metal Arc Welding Using a Silica Precursor as a Shielding Gas Additive;The Annals of Occupational Hygiene;2011-11-21