Ultra‐high voltage gain DC–DC converter based on new interleaved switched capacitor inductor for renewable energy systems

Abstract

SummaryIn this paper, introduces a DC–DC converter design based on a modified hybrid switched inductor‐switched capacitor architecture, aimed at achieving ultra‐high voltage gain in renewable energy systems (RES). The proposed converter involves adding a modified boosting conversion mode (MBM) that interleaves with the main switch to double the voltage transfer gain. Additionally, a modified switched capacitor (MSC) technique, utilizing two diodes as interleaved components, is integrated into the main and auxiliary switches to verify low voltage stress across them. In addition, modified hybrid switched inductors with capacitors (MSIC) and diodes are employed to validate ultra‐high voltage gain. The main advantages of the proposed converter are its high efficiency, low voltage stress across diodes and MOSFETs, and the utilization of low values of inductors and capacitors at high switching frequencies. In addition, the voltage stress across the inductors of the (MSIC) is reduced as the duty cycle increases. Furthermore, the current stress on the main switch is reduced when the charge of capacitor C1 becomes zero. Mathematical models for both continuous conduction mode (CCM) and discontinuous conduction mode (DCM) of the proposed converter are explored. Furthermore, a dual PI controller is designed for the proposed converter to maintain a high fixed output voltage. In addition, the PCB design and experimental testing of the proposed converter to verify the simulation and laboratory results. Specifically, the proposed converter is designed to boost up voltage (30–40 V) to a variable output voltage between 200 and 300 V at 300 W at efficiency 96.7%.