Thermal and Dielectric Properties of 3D Printed Parts Based on Polylactic Acid Filled with Carbon Nanostructures-Reference-Cited by-同舟云学术

Thermal and Dielectric Properties of 3D Printed Parts Based on Polylactic Acid Filled with Carbon Nanostructures

Published:2022-10 Issue:1 Volume:405 Page:2100244
ISSN:1022-1360
Container-title:Macromolecular Symposia
language:en
Short-container-title:Macromolecular Symposia

Author:

Spinelli Giovanni¹²,Kotsilkova Rumiana²,Ivanov Evgeni²³,Georgiev Vladimir³,Naddeo Carlo⁴,Romano Vittorio⁴^ORCID

Affiliation:

1. Università Telematica Giustino Fortunato Viale Raffaele Delcogliano 12 Benevento 82100 Italy

2. Open Laboratory on Experimental Micro and Nano Mechanics Institute of Mechanics, Bulgarian Academy of Sciences Acad. G. Bonchev Str., Block 4 Sofia 1113 Bulgaria

3. Research and Development of Nanomaterials and Nanotechnologies, Ltd. (NanoTechLab) Acad. G. Bonchev Str., Block 4 Sofia 1113 Bulgaria

4. Department of Industrial Engineering University of Salerno Via Giovanni Paolo II, 132 Fisciano SA 84084 Italy

Publisher

Wiley

Subject

Materials Chemistry,Polymers and Plastics,Organic Chemistry,Condensed Matter Physics

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/masy.202100244

Reference13 articles.

1. Overview of Current Additive Manufacturing Technologies and Selected Applications

2. Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications

3. A review of process development steps for new material systems in three dimensional printing (3DP)

4. 3D printing of multifunctional nanocomposites

5. Effects of Filament Extrusion, 3D Printing and Hot-Pressing on Electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Experimental study on the effect of filament-extrusion rate on the structural, mechanical and thermal properties of material extrusion 3D-printed polylactic acid (PLA) products;Progress in Additive Manufacturing;2024-05-12

2. Assessment of the Arc Resistance of 3D-Printed Insulation Materials for Outdoor High-Voltage Applications;Materials Science Forum;2024-02-29

3. Additive Manufacturing of Nanoscale and Microscale Materials;Additive Manufacturing with Novel Materials;2024-02-16

4. Universal Approach to Integrating Reduced Graphene Oxide into Polymer Electronics;Polymers;2023-12-05

5. Thermal conductivity of 3D-printed continuous pitch carbon fiber composites;Additive Manufacturing Letters;2023-02