Affiliation:
1. Institute of Advanced Electrical Materials Qingdao University of Science and Technology Qingdao China
2. State Key Laboratory of Electrical Insulation and Power Equipment Xi'an Jiaotong University Xi'an China
Abstract
AbstractSemiconductive shielding layer as an important part of high‐voltage cable, its performance directly affects the safe operation and the service life of the cable. Carbon black (CB) is the main conductive filler of shielding materials, and its type and concentration directly affect the performance of the shielding layer. In this paper, CB‐A with higher structure and CB‐B with lower structure were used as conductive fillers and EBA was chosen as the matrix resin to prepare the shielding materials. The CB concentrations of the shielding materials were 35, 45, and 55 phr. The influences of CB type and concentration on the physicochemical, electrical, thermal and mechanical properties of the shielding materials were investigated. The research shows that when the CB types are the same, the higher the concentration of CB, the more intensive the CB network in the shielding material, and the more serious the CB agglomeration phenomenon. With increasing CB concentration, shielding materials show a decreasing trend of volume resistivity, an increasing trend of thermal conductivity, and a decreasing trend of mechanical properties. When the CB concentration is the equal, the CB‐A has better dispersion in the matrix resin, CB‐A/EBA shielding material has lower volume resistivity and weaker PTC effect, CB‐A/EBA shielding material has higher thermal conductivity at low temperature and CB‐B/EBA shielding material has higher thermal conductivity at high temperature, CB‐A/EBA shielding material has better mechanical properties. A comprehensive comparison shows that CB‐A/EBA shielding material with a concentration of 45 phr has excellent overall performance, with volume resistivity of 15.3 and 68 Ω·cm at 25°C and 90°C, respectively. The thermal conductivity is 0.434 W/(m K) at room temperature and 0.536 W/(m K) at 90°C. The stress is 31.08 MPa and the strain is 570.2%. This work has important reference for the selection of conductive fillers and performance improvement of semiconductive shielding materials.
Funder
National Natural Science Foundation of China
Subject
Materials Chemistry,Polymers and Plastics,Physical and Theoretical Chemistry