Floating Carbon Nitride Composites for Practical Solar Reforming of Pre‐Treated Wastes to Hydrogen Gas

Abstract

AbstractSolar reforming (SR) is a promising green‐energy technology that can use sunlight to mitigate biomass and plastic waste while producing hydrogen gas at ambient pressure and temperature. However, practical challenges, including photocatalyst lifetime, recyclability, and low production rates in turbid waste suspensions, limit SR's industrial potential. By immobilizing SR catalyst materials (carbon nitride/platinum; CNx|Pt and carbon nitride/nickel phosphide; CNx|Ni2P) on hollow glass microspheres (HGM), which act as floating supports enabling practical composite recycling, such limitations can be overcome. Substrates derived from plastic and biomass, including poly(ethylene terephthalate) (PET) and cellulose, are reformed by floating SR composites, which are reused for up to ten consecutive cycles under realistic, vertical simulated solar irradiation (AM1.5G), reaching activities of 1333 ± 240 µmolH2 m−2 h−1 on pre‐treated PET. Floating SR composites are also advantageous in realistic waste where turbidity prevents light absorption by non‐floating catalyst powders, achieving 338.1 ± 1.1 µmolH2 m−2 h−1 using floating CNx versus non‐detectable H2 production with non‐floating CNx and a pre‐treated PET bottle as substrate. Low Pt loadings (0.033 ± 0.0013% m/m) demonstrate consistent performance and recyclability, allowing efficient use of precious metals for SR hydrogen production from waste substrates at large areal scale (217 cm2), taking an important step toward practical SR implementation.