Affiliation:
1. Department of Production Engineering Veer Surendra Sai University of Technology Burla, Sambalpur Odisha 768018 India
Abstract
AbstractCarbon fiber‐reinforced polymers are one of the lightweight materials used in structural design due to their exceptional mechanical performances. The drilling operation is indispensable as it facilitates the assembling of various manufactured components. However, drilling of fibrous laminates is deemed difficult in comparison to the traditional metals because of the anisotropic and non‐homogeneous nature. The present work addresses the parametric effect on the drilled hole delamination and further reduces it with an optimal combination of parameters for multi‐objectives using different multi‐criterion decision‐making techniques. Initially, the response surface‐based regression model of delamination as a function of three static inputs has been developed, further revised with induced thrust as well as mean torque for the improvisation of the prediction capability. Finally, for the overall improvement, a decision‐making model has been used that includes grey relation analysis, technique for order performance by similarity to ideal solution, and VIšekriterijumsko Kompromisno Rangiranje method. The delamination was found to be minimum at a low drill point angle (100°), high spindle rotation (2150 min−1 ), and low feed rate (0.025 mm/rev) due to reduced thrust force. The mean absolute prediction error was significantly improved considering root mean square torque rather than axial thrust with process variables.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献