Highly Accelerated Aging Method for Poly(ethylene terephthalate) Film Using Xenon Lamp with Heating System

Abstract

PET films were degraded at temperature higher than 100°C with steam and xenon light by using the newly developed system. Degradation products obtained using the proposed and conventional systems were essentially the same, as indicated by the similar increase in the intensity of the carbonyl peak near 1685 cm−1 in the FT-IR spectra of irradiated specimens and spectrum of original PET film. Elastic moduli derived from the stress-strain (SS) curves obtained in tensile tests were almost the same in the case of the proposed and conventional systems and were independent of the heating temperature, light intensity, and irradiation time. Tensile strength of degraded PET films decreases with increasing heating temperature. Tensile strengths of PET films degraded at same temperature decrease linearly with increasing intensity of xenon light. The lifetime at 90% strength of PET films was calculated. Attempts were made to express this lifetime as functions of the light intensity and the reciprocal of the absolute temperature by using the Eyring model. Estimated lifetime 15.9 h of tensile test using Eyring model for PET film agreed with the lifetime 22.7 h derived from data measured using the xenon weather meter.