Magnetic Properties and Core Loss Behavior of Fe-6.5wt.%Si Ribbons Prepared by Melt Spinning-Reference-Cited by-同舟云学术

Magnetic Properties and Core Loss Behavior of Fe-6.5wt.%Si Ribbons Prepared by Melt Spinning

Published:2015 Issue: Volume:2015 Page:1-6
ISSN:1687-8434
Container-title:Advances in Materials Science and Engineering
language:en
Short-container-title:Advances in Materials Science and Engineering

Author:

Wang S.¹,Jiang Y. M.¹,Liang Y. F.¹,Ye F.¹,Lin J. P.¹

Affiliation:

1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

Abstract

Fe-6.5wt.%Si alloy is prepared in the form of continuous ribbons with 25 mm in width and 0.03 mm in thickness by using melt spinning technique. The ribbons are flexible and could be wounded into tapes. DC magnetic properties and core loss behaviors of the ribbons after heat treatment are investigated in this paper. The magnetic properties are compared with ribbons by cold rolling and CVD methods. The melt spinning ribbons exhibit much less core loss in the frequencies more than 10 kHz. The melt spinning ribbons are promising to be used for electric devices used in medium or higher frequencies.

Funder

Major State Basic Research Development Program of China (973 Program)

Publisher

Hindawi Limited

Subject

General Engineering,General Materials Science

Link

http://downloads.hindawi.com/journals/amse/2015/410830.pdf

Reference15 articles.

1. Recent researches on high silicon-iron alloys

2. The B2 and DO3 Ordering Reactions in Iron–Silicon Alloys in the Vicinity of the Curie Temperature

3. Study of the brittle behaviour of annealed Fe-6.5 wt%Si ribbons produced by planar flow casting