Effect of Fe-Ni Substitution in FeNiSiB Soft Magnetic Alloys Produced by Melt Spinning-Reference-Cited by-同舟云学术

Effect of Fe-Ni Substitution in FeNiSiB Soft Magnetic Alloys Produced by Melt Spinning

Published:2021-12-01 Issue:4 Volume:21 Page:79-89
ISSN:2083-4799
Container-title:Advances in Materials Science
language:en
Short-container-title:

Author:

Kılıçaslan Muhammed Fatih¹,Yılmaz Yasin²,Akgül Bekir²,Karataş Hakan³,Vurdu Can Doğan⁴

Affiliation:

1. Department of Fundamental Sciences and Engineering , Sivas University of Science and Technology , Sivas , Turkey

2. Department of Aeronautical Engineering , Sivas University of Science and Technology , Sivas , Turkey

3. Department of Materials Sciences and Engineering , Kastamonu University , Kastamonu , Turkey

4. Department of Biomedical Engineering , Kastamonu University , Kastamonu , Turkey

Abstract

Abstract Alloys of FeNiSiB soft magnetic materials containing variable Fe and Ni contents (wt.%) have been produced by melt spinning method, a kind of rapid solidification technique. The magnetic and structural properties of FeNiSiB alloys with soft magnetic properties were investigated by increasing the Fe ratio. X-ray diffraction analysis and SEM images shows that the produced alloy ribbons generally have an amorphous structure, together with also partially nanocrystalline regions. It was observed that the structure became much more amorphous together with increasing Fe content in the composition. Among the alloy ribbons, the highest saturation magnetization was obtained as 0.6 emu/g in the specimen with 50 wt.% Fe. In addition, the highest Curie temperature was observed in the sample containing 46 wt.% Fe.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/adms-2021-0026

Reference51 articles.

1. 1. I.A. Figueroa, I. Betancourt, G. Lara, J.A. Verduzco, Effect of B, Si and Cr on the mechanical properties of Fe-based amorphous metallic ribbons, J. Non. Cryst. Solids. 351 (2005) 3075–3080. https://doi.org/10.1016/j.jnoncrysol.2005.07.017.10.1016/j.jnoncrysol.2005.07.017

2. 2. L. Guo, S. Geng, X. Gao, W. Wang, Numerical simulation of heat transfer and fluid flow during nanosecond pulsed laser processing of Fe78Si9B13 amorphous alloys, Int. J. Heat Mass Transf. 170 (2021). https://doi.org/10.1016/j.ijheatmasstransfer.2021.121003.10.1016/j.ijheatmasstransfer.2021.121003

3. 3. A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater. 48 (2000) 279–306. https://doi.org/10.1016/S1359-6454(99)00300-6.10.1016/S1359-6454(99)00300-6

4. 4. S. Cui, H. Zhai, W. Li, X. Fan, X. Li, W. Ning, D. Xiong, Microstructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray, Surf. Coat. Technol. 399 (2020) 126096. https://doi.org/10.1016/j.surfcoat.2020.126096.10.1016/j.surfcoat.2020.126096

5. 5. M.F. Kilicaslan, S.I. Elburni, B. Akgul, The effects of nb addition on the microstructure and mechanical properties of melt spun Al-7075 alloy, Adv. Mater. Sci. 21 (2021) 17–19. https://doi.org/10.2478/adms-2021-0008.10.2478/adms-2021-0008

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A study of the effect of Ti-Al-V microalloying on the mechanical and physical properties of invar 36;Materials Today Communications;2024-06

2. Evolution of the magnetic properties of melt-spun NdFeB alloys with the addition of waste NdFeB magnet;Journal of Materials Science: Materials in Electronics;2023-05

3. Effects of flash annealing and external magnetic field on magnetic properties of relatively high Nd content (37% by weight) NdFeB alloy;Journal of Materials Science: Materials in Electronics;2022-09-26

4. Effect of heat treatment time on magnetic properties of NdFeB-based permanent magnetic alloys;European Journal of Science and Technology;2022-09-23

5. Influence of microstructure of composite amorphous/nanocrystalline Fe72Ni8Si10B10 alloy on the corrosion behavior in various environments;Corrosion Science;2022-08