Experimental Study of an Adaptive Sequential Nonlinear LSE with Unknown Inputs for Structural Damage Tracking-Reference-Cited by-同舟云学术

Experimental Study of an Adaptive Sequential Nonlinear LSE with Unknown Inputs for Structural Damage Tracking

Published:2014 Issue: Volume:2014 Page:1-14
ISSN:1070-9622
Container-title:Shock and Vibration
language:en
Short-container-title:Shock and Vibration

Author:

Mu Tengfei¹,Zhou Li¹,Yang Jann N.²

Affiliation:

1. State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

2. Department of Civil & Environmental Engineering, University of California, Irvine, CA 92697, USA

Abstract

An improved adaptive sequential nonlinear LSE with unknown inputs (ASNLSE-UI) approach was proposed to real-time-track the structural damage when it occurs for structural safety and management after emergency event. Experimental studies are presented to verify the capability of the improved ASNLSE-UI approach. A series of tests using a small-scale 3-story base-isolated building have been performed. White noise and earthquake excitations, applied to the base of the model, have been used. To simulate structural damages during the test, an innovative device is designed and manufactured to reduce the stiffness of some stories. With the measured response data of different damage scenarios, the improved ASNLSE-UI approach is used to track the variation of structural physical parameters. Besides, the unknown inputs are simultaneously identified. Experimental results demonstrate that the improved ASNLSE-UI approach is capable of tracking the variation of stiffness parameters leading to the detection of structural damages.

Funder

National Natural Science Foundation of China

Publisher

Hindawi Limited

Subject

Mechanical Engineering,Mechanics of Materials,Geotechnical Engineering and Engineering Geology,Condensed Matter Physics,Civil and Structural Engineering

Link

http://downloads.hindawi.com/journals/sv/2014/294163.pdf

Reference35 articles.

1. Preface to the Special Issue on Phase I of the IASC-ASCE Structural Health Monitoring Benchmark

2. Input/output system identification of simultaneous mass/stiffness damage assessment using discrete-time pulse responses, differential evolution algorithm, and equivalent virtual damped SDOF

3. Performance of Vibration-based Techniques for the Identification of Structural Damage

4. A time-domain nonlinear system identification method based on multiscale dynamic partitions

5. On-line identification of non-linear hysteretic structural systems using a variable trace approach

Cited by 3 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Comparison of the performance of nonlinear Kalman filter based algorithms for state‐parameter identification of base isolated structures;Structural Control and Health Monitoring;2022-06-14

2. Novel tensor subspace system identification algorithm to identify time-varying modal parameters of bridge structures;Structural Health Monitoring;2021-08-10

3. An Improved Sensitivity Method for the Simultaneous Identification of Unknown Parameters and External Loads of Nonlinear Structures;Shock and Vibration;2018-11-07