Fatigue Load Spectrum of Highway Bridge Vehicles in Plateau Mountainous Area Based on Wireless Sensing

Abstract

In Yunnan and other plateau mountainous areas, hydropower and mineral resources are abundant, and there are relatively many vehicles used for the transportation of large hydropower facilities. The widespread phenomenon of vehicle overload causes severe fatigue among the drivers. However, there is no reference vehicle load spectrum for fatigue analysis in the existing research. The application of wireless sensing technology to bridge health monitoring is favorable for the entire monitoring system’s low-cost and intelligent development. In this study, wireless sensors are used to collect sensing data in the measured area and perform preliminary filtering processing. The data collected by the sensing layer is aggregated at the TD gateway layer to realize local short-term storage of monitoring data, and 3G wireless transmission is used for the effective processing of the data. The clustering method is used to classify the vehicle models based on investigating the most representative expressway traffic flow information in Yunnan Province. Moreover, the weighted probability distribution model of different vehicle models is established through statistical analysis, which simplifies the composition’s fatigue intensity spectrum model. The selection of five vehicles of the equivalent model followed by a six-axle vehicle has the most significant impact on bridge damage as the standard fatigue vehicle. The research results establish a basis for the fatigue design of highway bridges in plateau and mountainous areas and provide data to establish vehicle fatigue load spectra in national highway regions.