Model studies on plate girders

Abstract

Tests on eighteen small scale models which simulate the elastic and post-buckling behaviour of plate girders when subjected to shear loading are reported and discussed. The models were fabricated of steel and Araldite; the major aim was to assess whether small scale models can be employed to study shear buckling problems. A secondary object was to examine whether araldite could be used for predicting the structural behaviour and ultimate loads of plate girders. The strength and post-buckling characteristics exhibited by steel models were found to be similar to those observed by earlier investigators on full scale girders. The test results of steel models have been compared with the theoretical predictions obtained by using some ten design methods developed in different countries. Most of these methods are shown to give conservative but satisfactory predictions of the ultimate shear capacity of the model steel girders. Tests on Araldite models demonstrated that post-buckling behaviour can be observed visually on account of the large elastic deformations which the material is capable of, before collapse. However, they were found to be unsuitable for the prediction of the ultimate shear capacity. As Araldite is brittle, collapse would occur prematurely by sudden fracture before the full development of the tension field.