A theoretical and experimental investigation of thrust and torque in vibration microdrilling-Reference-Cited by-同舟云学术

A theoretical and experimental investigation of thrust and torque in vibration microdrilling

Published:2001-11-01 Issue:11 Volume:215 Page:1539-1548
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Wang L-P¹,Wang J-S¹,Ye P-Q¹,Wang L-J²

Affiliation:

1. Manufacturing Engineering Institute Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, People's Republic of China

2. Jilin University of Technology School of Mechanical Science and Engineering, Changchun, People's Republic of China

Abstract

A method for predicting the thrust and torque in vibration microdrilling is proposed. The model is based on the mechanics of vibration cutting analysis, which involves the development of a dynamic uncut chip thickness analysis for each vibration cutting element at the lips and chisel edge. The proposed method has been tested for a range of vibration parameters and feeds. The predicted thrust and torque values have been compared with those obtained in vibration microdrilling experiments. These comparisons showed good agreement between the theoretical predictions and the experimental evidence.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/0954405011519448

Reference15 articles.

1. Basic Study of High Speed Micro Deep Drilling

2. Investigation into Drilling Laminated Printed Circuit Board Using a Torque-Thrust-Temperature Sensor

3. Burrless Drilling by Means of Ultrasonic Vibration

4. Kumabe J. Vibration Cutting, 1977, pp. 310–323 (Practice Education Publishing Company, Tokyo).

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Measurement and analysis of radial force, radial torque and surface integrity in micro-drilling of an Al7075-T6 alloy;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2023-08-09

2. Prediction model optimization and experimental verification based on the material characteristic and dynamic angle on thrust force and torque in drilling GJV450;The International Journal of Advanced Manufacturing Technology;2023-05-05

3. Prediction of tool wear in CFRP drilling based on neural network with multicharacteristics and multisignal sources;Composites and Advanced Materials;2021-01-01

4. Prediction model, simulation, and experimental validation on thrust force and torque in drilling SiCp/Al6063;The International Journal of Advanced Manufacturing Technology;2019-03-16

5. Aerostructural Assembly Deformation Prediction Considering Drilling-Induced Stresses;Journal of Aerospace Engineering;2015-11