Friction tests in tube hydroforming-Reference-Cited by-同舟云学术

Friction tests in tube hydroforming

Published:2005-08-01 Issue:8 Volume:219 Page:587-593
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Hwang Yeong-Maw¹,Huang Li-Shan¹

Affiliation:

1. Department of Mechanical and Electro-mechanical Engineering, National Sun Yat-Sen University, Taiwan, Republic of China

Abstract

The objective of this paper is to propose a friction test method to evaluate the performance of different kinds of lubricants and determine their coefficients of friction in tube hydroforming processes. A self-designed apparatus is used to conduct the experiments of friction tests. The coefficient of friction between the tube and the die at the guiding zone is determined. The effects of the internal pressure and the axial feeding velocity on the friction forces and coefficients of friction for various lubricants are discussed. From the experimental results, it is known that MoS2 corresponding to a coefficient of friction of 0.018 is the best lubricant among the evaluated lubricants during tube hydroforming processes.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/095440505X32517

Reference16 articles.

1. Evaluation of tube formability and material characteristics: hydraulic bulge testing of tubes

2. Tube hydroforming: state-of-the-art and future trends

3. Tube hydroforming—research and practical application

4. Hydroforming - a method to manufacture light-weight parts

5. Analytical modelling of tube hydroforming

Cited by 38 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. New instability model leading the wrinkling at the positive-curvature arc part during the tube hydro-forging process;International Journal of Mechanics and Materials in Design;2024-01-28

2. Study on forming process of equal wall thickness metal spiral pipe by single screw pump;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2023-11-03

3. Feeding path and movable die design in tube hydroforming of metal bellows;The International Journal of Advanced Manufacturing Technology;2023-10-16

4. Dimensional optimization of variable thickness tube in T-shaped tube hydroforming using response surface methodology;IOP Conference Series: Materials Science and Engineering;2022-12-01

5. Friction Modelling for Tube Hydroforming Processes—A Numerical and Experimental Study with Different Viscosity Lubricants;Materials;2022-08-17