Local instrumentation for the investigation of multi-phase parameters in a packed bed-Reference-Cited by-同舟云学术

Local instrumentation for the investigation of multi-phase parameters in a packed bed

Published:2007-11-01 Issue:4 Volume:221 Page:187-199
ISSN:0954-4089
Container-title:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Author:

Revankar S. T.¹,Olenik H¹,Jo D¹,Motil B²

Affiliation:

1. School of Nuclear Engineering, Purdue University, West Lafayette, Indiana, USA

2. NASA Glenn Research Center, Fluid Physics and Transport Branch, Cleveland, Ohio, USA

Abstract

Local two-point conductivity probe and film-thickness probes were developed for measurement of two-phase flow parameters in a packed bed containing spherical packing. The probes were calibrated and installed in a packed bed with minimal flow disturbance. A flush and two parallel wire film-thickness probes were used to measure the liquid film thickness on the packing. The conductivity probe and impedance meter were used to measure local and bed wise void fraction, respectively, for trickle, wavy, transitional, pulsing, and bubbly flow.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/09544089JPME142

Reference26 articles.

1. Trickle-bed reactors

2. Origin of disturbances in cocurrent gas-liquid packed bed flows

3. Heat transfer characterization of gas–liquid flows in a trickle-bed

4. A study of local liquid/solid mass transfer in packed beds under trickling and induced pulsing flow

5. LIQUID FILM THICKNESS MEASUREMENT

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Atomistic modeling of idealized equal channel angular pressing process;Journal of Materials Science;2024-02-27

2. Steady-State Sensitivities of Marine Propulsion Control Techniques;Journal of Control, Automation and Electrical Systems;2021-03-16

3. Ship acceleration motion under the action of a propulsion system: a combined empirical method for simulation and optimisation;Journal of Marine Engineering & Technology;2020-10-07

4. Feasibility of Electrical Resistance Tomography for measurements of liquid holdup distribution in a trickle bed reactor;Chemical Engineering Journal;2019-02

5. Identification of flow regime in a cocurrent gas – Liquid upflow moving packed bed reactor using gamma ray densitometry;Chemical Engineering Science;2017-08