Automated tilt compensation in acoustic microscopy

Abstract

AbstractScanning acoustic microscopy (SAM) is a potent and nondestructive technique capable of producing three‐dimensional topographic and tomographic images of specimens. This is achieved by measuring the differences in time of flight (ToF) of acoustic signals emitted from various regions of the sample. The measurement accuracy of SAM strongly depends on the ToF measurement, which is affected by tilt in either the scanning stage or the sample stage. Hence, compensating for the ToF shift resulting from sample tilt is imperative for obtaining precise topographic and tomographic profiles of the samples in a SAM. In the present work, we propose an automated tilt compensation in ToF of acoustic signal based on proposed curve fitting method. Unlike the conventional method, the proposed approach does not demand manually choosing three separate coordinate points from SAM's time domain data. The effectiveness of the proposed curve fitting method is demonstrated by compensating time shifts in ToF data of a coin due to the presence of tilt. The method is implemented for the correction of different amounts of tilt in the coin corresponding to angles 6.67°, 12.65° and 15.95°. It is observed that the present method can perform time offset correction in the time domain data of SAM with an accuracy of 45 arcsec. The experimental results confirm the effectiveness of the suggested tilt compensation technique in SAM, indicating its potential for future applications.