Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results-Reference-Cited by-同舟云学术

Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results

Published:2021-05-05 Issue: Volume: Page:
ISSN:8756-758X
Container-title:Fatigue & Fracture of Engineering Materials & Structures
language:en
Short-container-title:Fatigue Fract Eng Mater Struct

Author:

Tridello Andrea¹^ORCID,Boursier Niutta Carlo¹,Berto Filippo²^ORCID,Qian Guian³⁴^ORCID,Paolino Davide S.¹^ORCID

Affiliation:

1. Department of Mechanical and Aerospace Engineering Politecnico di Torino Turin Italy

2. Department of Mechanical and Industrial Engineering Norwegian University of Science and Technology (NTNU) Trondheim Norway

3. State Key Laboratory of Nonlinear Mechanics (LNM), Institute of Mechanics Chinese Academy of Sciences Beijing China

4. School of Engineering Science University of Chinese Academy of Sciences Beijing China

Funder

National Natural Science Foundation of China

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1111/ffe.13467

Reference36 articles.

1. https://www.eos.info/case_studies/additive-manufacturing-of-antenna-bracket-for-satellite Accessed 22th October 2020.

2. Additive manufacturing and topology optimization: a design strategy for a steering column mounting bracket considering overhang constraints;Mantovani S;P I Mech Eng C‐J Mec,2020

3. Qualification of additively manufactured aerospace brackets: A comparison between thermoelastic stress analysis and theoretical results;Allevi G;Measurement,2018

4. Numerical modeling and testing of mechanical behavior of AM Titanium alloy bracket for aerospace applications;Brusa E;Procedia Struct Integr,2017

5. Additive manufacturing of heat exchangers: a case study on a multi‐layered Ti–6Al–4V oscillating heat pipe;Thompson SM;Additive Manufacturing,2015

Cited by 18 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Nondestructive Fatigue Life Prediction for Additively Manufactured Metal Parts through a Multimodal Transfer Learning Framework;IISE Transactions;2024-09-03

2. On the notch sensitivity of as‐built Laser Beam Powder Bed–Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 10⁹ cycles;Fatigue & Fracture of Engineering Materials & Structures;2024-08-23

3. Very high cycle fatigue of laser powder bed fused Al-Cu-Mg-Ag-TiB2 (A20X) Alloy: Stress relief and aging treatments;International Journal of Fatigue;2024-06

4. Fatigue behavior in the presence of defects;Fatigue in Additive Manufactured Metals;2024

5. Wire arc additive manufactured AWS ER100S-G steel: Very high cycle fatigue characterization;Engineering Failure Analysis;2023-12