The quasi‐static crush response of electron‐beam‐melt Ti6Al4V body‐centred‐cubic lattices: The effect of the number of cells, strut diameter and face sheet-Reference-Cited by-同舟云学术

The quasi‐static crush response of electron‐beam‐melt Ti6Al4V body‐centred‐cubic lattices: The effect of the number of cells, strut diameter and face sheet

Published:2022-02-22 Issue:3 Volume:58 Page:
ISSN:0039-2103
Container-title:Strain
language:en
Short-container-title:Strain

Author:

Güden Mustafa¹^ORCID,Alpkaya Alican Tuncay¹,Hamat Burcu Arslan²,Hızlı Burak¹,Taşdemirci Alper¹^ORCID,Tanrıkulu Ahmet Alptuğ²,Yavaş Hakan²

Affiliation:

1. Dynamic Testing and Modeling Laboratory and Department of Mechanical Engineering Izmir Institute of Technology Izmir Turkey

2. Additive Manufacturing Technology Center Turkish Aerospace Industries Ankara Turkey

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1111/str.12411

Reference56 articles.

1. Additive manufacturing of metals

2. Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering

3. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting

4. Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting

5. Mechanical properties tailoring of topology optimized and selective laser melting fabricated Ti6Al4V lattice structure

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Sensitivity Analysis of Wear on Metal-On-Metal Bearing Couples via Verification of Numeric and Analytic Methods;Hittite Journal of Science and Engineering;2024-06-30

2. Investigation of stair ascending and descending activities on the lifespan of hip implants;Medical Engineering & Physics;2024-04

3. Compressive properties of AlSi10Mg lattice structures with novel BCCZZ and FCCZZ configurations fabricated by selective laser melting;Rapid Prototyping Journal;2024-03-29

4. Energy absorption of PLA-based metamaterials manufactured by material extrusion: dynamic loads and shape recovery;The International Journal of Advanced Manufacturing Technology;2024-03-23

5. Mechanical and microstructural characterization of Ti6Al4V lattice structures with and without solid shell manufactured via electron beam powder bed fusion;The International Journal of Advanced Manufacturing Technology;2024-02-06