Energy absorption of PLA-based metamaterials manufactured by material extrusion: dynamic loads and shape recovery

Abstract

AbstractThe objective of the study is to evaluate the performance of solid cellular structures in Polylactic Acid (PLA) by extrusion of material. The structures studied are Strut-Based, Triply Periodic Minimal Surfaces (TPMS) and Spinoidal. Impact tests allowed the identification of three categories of energy absorption (low, medium, high). The structures with lower deformation were subsequently subjected to cyclic impact tests, while the others were discarded from the analysis. Once the structures were deformed, they were immersed in a thermostat bath at 70 ºC, a temperature higher than the glass transition of PLA, necessary for the recovery of shape. TPMS structures display the best performance for high and medium impact energies, thanks to the presence of few internal defects. Spinoidal structures perform well at low impact energies but are less suitable for cyclic testing due to their geometric characteristics. Despite featuring the same density of TPMS structures, the strut based ones are not suitable for cyclic testing due to poor mechanical strength. The experimental findings are very promising as the best performing structures can be suitable for the fabrication of products with an increased life cycle, especially in the ever growing and flourishing market of technical items for impacts protection.