Mode II fracture toughness of two-part acrylic-based adhesive in an adhesively bonded joint: end-notched flexure tests under static loading-Reference-Cited by-同舟云学术

Mode II fracture toughness of two-part acrylic-based adhesive in an adhesively bonded joint: end-notched flexure tests under static loading

Published:2017-02-21 Issue:11 Volume:40 Page:1795-1808
ISSN:8756-758X
Container-title:Fatigue & Fracture of Engineering Materials & Structures
language:en
Short-container-title:Fatigue Fract Engng Mater Struct

Author:

Kim H.-B.¹^ORCID,Naito K.¹,Oguma H.¹

Affiliation:

1. National Institute for Materials Science; Research Center for Structural Materials (RCSM), Polymer Matrix Hybrid Composite Materials Group; 1-2-1 Sengen, Tsukuba Ibaraki 305-0047 Japan

Publisher

Wiley

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

http://onlinelibrary.wiley.com/wol1/doi/10.1111/ffe.12599/fullpdf

Reference51 articles.

1. Advantages and application possibilities of adhesive bonding;Kozuh;Promet-Traffic-Traffico.,1997

2. Fracture mechanics tests in adhesively bonded joints: a literature review;Chaves Filipe;The J. of Adhes.,2014

3. Adhesion and Adhesives

4. An analysis of the crack tip stress field in DCB adhesive fracture specimens;Wang;Inter. J. of Fract.,1978

5. Fracture toughness of adherends bonded with two-part acrylic-based adhesive: double cantilever beam tests under static loading;Hyun-Bum;Appl. Adhes. Sci.,2016

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Fatigue failure of soft adhesive systems: A state-of-the-art review;Giant;2024-08

2. Proposal of Evaluation Method for Crack Propagation Behaviors of Second-Generation Acrylic Adhesives under Mode I Static Loading;Polymers;2023-04-14

3. Investigation of the effects of central rectangular gap located in the adhesive layer on failure load and joint stiffness;Journal of the Brazilian Society of Mechanical Sciences and Engineering;2022-04-02

4. Fiber Takviyeli Kompozitlerin Farklı Deformasyon Hızındaki Mod I ve Mod I/II Kırılma Davranışların İncelenmesi;Journal of Polytechnic;2020-09-21

5. The effects of temperature and deformation rate on fracture behavior of S‐2 glass/epoxy laminated composites;Polymer Composites;2020-08-08