Effect of induced electric field parameters on physiochemical characteristics and microorganism of orange juice

Abstract

AbstractThe induced electric field (IEF) was produced via an oscillating magnetic field, for direct heating of orange juice within a winding coil. During the process, the applied magnetic field was at the range from 0.07 to 1.43 T with 50 kHz. Then, the numerical relationships between excitation voltage, magnetic field, IEF, induced current density, magnetomotive force and energy efficiency were investigated. Since a rectangular wave of excitation voltage was applied, the sawtooth waveform of induced voltage or IEF loaded on the juice was observed. As the magnetic field increased, outlet temperature and induced current density in the juice was improved, the maximum values were 99.5°C and 0.50 A/cm2, respectively, at a conductivity 4.53 mS/cm for the residence time of 4.5 min. However, the efficiency of the process exhibited a negative correlation with the escalation of excitation voltage. At initial colony count about 4.50 log colony‐forming units/mL, the IEF pasteurization reduced all the aerobic microorganisms, molds, and yeasts in the juice, which were evaluated at detectable limits below 1 log colony‐forming units/mL. Moreover, all treatments had no significant effects on pH, total soluble solids and titratable acidity of the juice (p > 0.05). In particular, there was also no significant change in color parameters after IEF pasteurization (p > 0.05). It indicated a significant decrease in vitamin C and total phenolic content of the control groups (p > 0.05), but no significant change in carotenoid content was observed in all treated juice (p > 0.05). heating technology using IEF has the potential to the pasteurization of fruit juice.Practical applicationsInduction electric field technology has progressed rapidly in the past 2 years, it can use oscillating alternating magnetic field to realize the direct heating of liquid food. The process has thermal and non‐thermal effects, at 65–70°C, within 15–30 s to achieve the commercial asepsis of acidic liquid food. After the pasteurization, it can better maintain the color and flavor of the juice. We have assembled a laboratory prototype for testing in the early stage, the processing capacity is at the range of 0–10 L/h. Currently, the system has been able to reach the pilot production scale with the processing capacity of 100–500 L/h. Through the use of highly permeable magnetic materials, the energy consumption per ton of juice processing is controlled at 120 k·Wh level for the pasteurization and is expected to achieve a larger processing capacity in the future.