Abstract
A numerical analysis is presented to model the cone penetration test (CPT) tip resistance in layered soil. Analyses are performed for two-layer soils composed of either sands with different relative densities or different materials (sand and clay). Parametric numerical modeling is used to determine the distance that a cone senses a new upcoming soil layer interface or a layer interface behind. Analyses are also carried out for a thin sand layer embedded in soft clay. It is seen that the full tip resistance may not be reached in thin stiff layers. This is especially true for penetration in thin dense sand layers interbedded in softer clay. A correction factor is suggested to correct the cone tip resistance in thin sand layers. The higher the stiffness and the thinner the layer, the larger the correction factor. The numerical results obtained in this paper are in good agreement with experimental observations. Some limitations of a previously proposed correction factor are discussed.Key words: cone tip resistance, modeling, sand, clay, interface influence distance, layering.
Publisher
Canadian Science Publishing
Subject
Civil and Structural Engineering,Geotechnical Engineering and Engineering Geology
Cited by
69 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献