Affiliation:
1. National Observatory, Rio de Janeiro , Brazil (Corresponding author)
2. Federal Institute of Education, Science and Technology of Bahia, Bahia , Brazil
3. National Observatory, Rio de Janeiro , Brazil; Fluminense Federal University, Rio de Janeiro, Brazil
4. Baker Hughes
Abstract
Summary
This paper describes the study of dissolution and mineralogical alteration caused by saline carbonated water injection (CWI) and its effects on the petrophysical properties (porosity and permeability) of limestone samples from the Mupe Member, composed of lacustrine microbialites from the Upper Jurassic, part of the Purbeck Group lower portion. These limestones are a partial analog of the Brazilian presalt Aptian carbonates, the most important oil reservoir in Brazil. These reservoirs present large amounts of CO2 that are reinjected into the formation, which given the high reactivity of carbonate rocks in the presence of carbonic acid generated by the reaction between CO2 and water, can cause damage to the rock’s pore space. To achieve the proposed objectives, four laminated/massive samples with very low permeability (<5 md) and two vuggy/microbial samples with very high permeability (>1,700 md) underwent laboratory tests carried out before, during, and after CWI, including gas porosity and permeability measurement, nuclear magnetic resonance (NMR), microcomputed tomography (micro-CT), and ion chromatography. X-ray diffraction (XRD) analysis and petrographic thin-section observations were also performed. The experimental results showed that samples with high permeability showed a small decrease in permeability, possibly indicating formation damage, while low-permeability samples presented a significant increase in permeability with little change in porosity, indicating feasibility for carbon capture and storage (CCS) in similar samples in likewise experimental conditions (20°C and 500 psi). For samples with more pore volumes injected, the pressure stabilization seems to have favored dissolution in the later injection stages, indicated by the highest output of calcium ions. In all samples occurred salt precipitation during injection, especially in the more heterogeneous rocks, presenting a possible issue.
Publisher
Society of Petroleum Engineers (SPE)
Subject
Geology,Energy Engineering and Power Technology,Fuel Technology
Reference45 articles.
1. CO2 Storage in Low Permeable Carbonate Reservoirs: Permeability and Interfacial Tension (IFT) Changes During CO2 Injection in an Iranian Carbonate Reservoir;Afkhami Karaei;Period Polytech Chem Eng,2019
2. Classification and Environmental Significance of Cryptalgal Limestones and Dolomites, with Illustrations from the Cambrian and Ordovician of Southwestern Alberta;Aitken;SEPM JSR,1967
3. Petrophysical, Petrographic and Mineralogical Characterization of Pre-Salt Analogue – Purbeck Group, UK;Albuquerque,2021
4. Aquifer Management To Accelerate CO2 Dissolution and Trapping;Anchliya;SPE J.,2012
5. Carbonated Water Injection: An Efficient EOR Approach. A Review of Fundamentals and Prospects;Bisweswar;J Petrol Explor Prod Technol,2020
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献