Insights on Gas and Water Coning/Channeling Processes in a Fractured Carbonate Reservoir from Embedded Discrete Fracture Modeling

Abstract

Abstract Coning is the mechanism describing movement of water from an aquifer and/or gas from gas-cap into the perforations of a producing well. The interface between the fluid phases deforms into a cone shape if the reservoirs are relatively homogeneous. In fractured reservoirs, water/gas incursions can take the form of discrete channels through fractures that connect the water/gas zone to the wellbore. Coning/channeling tends to increase the cost of production operations and influences the overall recovery efficiency of oil reservoirs. The coning/channeling processes constitute one of the most complex problems pertaining to oil production. This study investigates coning/channeling in an Atlantic margin pre-salt fractured carbonate reservoir using Embedded Discrete Fracture Modeling (EDFM) to gain a better understanding of the processes in fractured reservoirs. This study focused on a sector Discrete Fracture Network (DFN) that was used to create a full-field Dual Porosity-Dual Permeability (DPDK) model. The DFN was used to generate end member models that capture the range of connectivity, geometry, and heterogeneity of fracture systems thought to exist in the field based on well log and core analysis. The sector area of interest also included existing producers and injectors and future infill wells. The coning/channeling phenomena were modeled using the EDFM method. The models were flow simulated using representative initialization, field management logic, and well producing rules, based on the history-matched full-field DPDK model. Mitigation methods to reduce coning impacts were also investigated. EDFM, which represents the fracture network explicitly, provides insight on gas and water coning/channeling processes in a fractured carbonate reservoir. We find that fractures can lead to local channeling and coning. The degree of channeling and coning is a function of flow rates, fracture properties, and matrix-fracture exchange which in turn depends on rock property contrast between matrix and fractures. If matrix permeability is sufficiently high, matrix-fracture exchange is significant and fractures can act like leaky pipes. The effect of local gas coning/channeling is stronger in cases of isolated fractures surrounded by lower permeability rock. Water and gas coning can occur at the same time and interact with each other. Mitigation methods such as reducing well rates and use of selective completions can be applied to manage the gas and water coning/channeling.