Author:
Fosudo Toluwalase,Kar Tanmay,Windom Bret,Schlagel Jacob,Olsen Daniel
Abstract
<div class="section abstract"><div class="htmlview paragraph">Liquefied petroleum gas (LPG), like many other alternative fuels, has witnessed increased adoption in the last decade, and its use is projected to rise as stricter emissions regulations continue to be applied. However, much of its use is limited to dual fuel applications, gaseous phase injection, light-duty passenger vehicle applications, or scenarios that require conversion from gasoline engines. Therefore, to address these limitations and discover the most efficient means of harnessing its full potential, more research is required in the development of optimized fuel injection equipment for liquid port and direct injection, along with the implementation of advanced combustion strategies that will improve its thermal efficiency to the levels of conventional fuels. This paper focuses on the development of a liquid phase port-injection system for LPG, the design of a reference piston, and the baseline evaluation of the performance, combustion, and emissions characteristics of a single cylinder research engine to establish a benchmark comparable to existing LPG engines. A sweep of start of injection (SOI) timing is performed by injecting liquid LPG at several closed and open intake valve timings, which demonstrates no significant variation in engine performance, but accounts for a 10% reduction in bsCO with the optimal SOI timing. Spark timing sweep demonstrates the 50% burn crank angle location related to maximum brake torque (MBT) point with a brake thermal efficiency (BTE) of ~34% for the tested load case. The effect of equivalence ratio is also presented with optimal SOI timing at MBT condition. The engine starts exhibiting knocking combustion at 140kPa intake manifold air pressure (IMAP) with a peak torque of 253Nm and a 5% reduction in brake specific fuel consumption compared to the naturally aspirated scenario.</div></div>
Reference42 articles.
1. US Energy Information Administration (EIA)
2022 https://www.eia.gov/energyexplained/use-of-energy/transportation.php
2. Bae , C. and
Kim , J.
Alternative Fuels for Internal Combustion Engines Proceedings of the Combustion Institute 36 3 2017 3389 3413 10.1016/j.proci.2016.09.009
3. Kalghatgi , T.
The Outlook for Fuels for Internal Combustion Engines International Journal of Engine Research 15 4 2014 383 398 https://doi.org/10.1177/1468087414526189
4. Campbell , M. ,
Wyszyński , P. , and
Stone , R.
Combustion of LPG in a Spark-Ignition Engine SAE Technical Paper 2004-01-0974 2004 https://doi.org/10.4271/2004-01-0974
5. Gomez , E. and
Walker , B.
2019