Copper electrode preparation by a selective laser reduction of copper oxide on lignin fiber membranes and its application as a photodetector

Abstract

The performance of electrodes is a key factor affecting the development of smart fabrics. The preparation of common fabric flexible electrodes has defects such as high cost, complicated preparation, and complex patterning that limit the development of fabric-based metal electrodes. Therefore, this paper presented a simple fabrication method for preparing Cu electrodes using selective laser reduction of CuO nanoparticles. By optimizing laser processing power, scanning speed, and focusing degree), we prepared a Cu circuit with an electrical resistivity of ∼ 5.53 µΩ.m. Based on the photothermoelectric properties of Cu electrodes, a white light photodetector is developed. The detectivity of the photodetector reaches ∼2.14 mA/W at a power density of 10.01 mW/cm2. This method is instructive for preparing metal electrodes or conductive lines on the surface of fabrics, and provides specific techniques for manufacturing wearable photodetectors.