3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes-Reference-Cited by-同舟云学术

3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes

Published:2019-11 Issue: Volume:183 Page:121870
ISSN:0032-3861
Container-title:Polymer
language:en
Short-container-title:Polymer

Author:

Chen Yuanyuan,Neff Martin,McEvoy Brian^ORCID,Cao Zhi,Pezzoli Romina,Murphy Alan,Gately Noel,Jnr Michael Hopkins,Rowan Neil J.,Devine Declan M.^ORCID

Funder

Athlone Institute of Technology under the Presidents Seed Fund

Enterprise Ireland

Science Foundation Ireland

Publisher

Elsevier BV

Subject

Polymers and Plastics,Materials Chemistry,Organic Chemistry

Reference28 articles.

1. How 3D Printing Is Revolutionizing Healthcare as We Know it;Reichental,2018

2. Sterilization of implantable polymer-based medical devices: a review;Tipnis;Int. J. Pharm.,2018

3. Disinfection and toxicological assessments of pulsed UV and pulsed-plasma gas-discharge treated-water containing the waterborne protozoan enteroparasite Cryptosporidium parvum;Hayes;J. Microbiol. Methods,2013

4. White Paper: A Comparison of Gamma, E-Beam, X-Ray and Ethylene Oxide Technologies for the Industrial Sterilization of Medical Devices and Healthcare Products;Gamma Industry Processing Alliance, International Irradiation Association,2017

5. FDA Innovation Challenge 2: Reduce Ethylene Oxide Emissions;U.S. FOOD & DRUG ADMINISTRATION,2019

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Powder Bed Fusion 3D Printing in Precision Manufacturing for Biomedical Applications: A Comprehensive Review;Materials;2024-02-05

2. Use of real-time immersive digital training and educational technologies to improve patient safety during the processing of reusable medical devices: Quo Vadis?;Science of The Total Environment;2023-11

3. The impact of sterilization, body environment condition and raster orientation on tensile-shear cracking of sub-sized 3D printed specimens;Theoretical and Applied Fracture Mechanics;2023-08

4. Challenges and future opportunities to unlock the critical supply chain of personal and protective equipment (PPE) encompassing decontamination and reuse under emergency use authorization (EUA) conditions during the COVID-19 pandemic: Through a reflective circularity and sustainability lens;Science of The Total Environment;2023-03

5. The challenges associated with fused deposition modelling of high-density polyethylene for facial augmentation implants: a review;MATEC Web of Conferences;2023