Assessing the compressive and tensile properties of TPMS-Gyroid and stochastic Ti64 lattice structures: A study on laser powder bed fusion manufacturing for biomedical implants-Reference-Cited by-同舟云学术

Assessing the compressive and tensile properties of TPMS-Gyroid and stochastic Ti64 lattice structures: A study on laser powder bed fusion manufacturing for biomedical implants

Published:2024-03 Issue:1 Volume:9 Page:100663
ISSN:2468-2179
Container-title:Journal of Science: Advanced Materials and Devices
language:en
Short-container-title:Journal of Science: Advanced Materials and Devices

Author:

Araya Miguel^ORCID,Jaskari Matias^ORCID,Rautio Timo,Guillén Teodolito,Järvenpää Antti^ORCID

Publisher

Elsevier BV

Subject

Materials Science (miscellaneous),Biomaterials,Ceramics and Composites,Electronic, Optical and Magnetic Materials

Reference49 articles.

1. Additive manufacturing of biomimetic titanium-tantalum lattices for biomedical implant applications;Soro;Mater. Des.,2022

2. Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications;Ataee;Mater. Des.,2018

3. Effect of geometry on the mechanical properties of Ti-6Al-4V gyroid structures fabricated via SLM: a numerical study;Yang;Mater. Des.,2019

4. Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting;Murr;J. Mech. Behav. Biomed. Mater.,2011

5. Selective laser melting of Ti6Al4V sub-millimetric cellular structures: prediction of dimensional deviations and mechanical performance;Bartolomeu;J. Mech. Behav. Biomed. Mater.,2021

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Tensile deformation and failure of AlSi10Mg random cellular metamaterials;International Journal of Mechanical Sciences;2024-11

2. Enhancing tensile properties of polymer‐based triply periodic minimal surface metamaterial structures: Investigating the impact of post‐curing time and layer thickness via response surface methodology;Polymer Engineering & Science;2024-09-09

3. Comparative fatigue performance of as-built vs etched Ti64 in TPMS-gyroid and stochastic structures fabricated via PBF-LB for biomedical applications;Rapid Prototyping Journal;2024-08-20

4. Topology optimisation and lithography-based ceramic manufacturing of short-stem hip prostheses with enhanced biomechanical and mechanobiological performance;Virtual and Physical Prototyping;2024-08-11

5. A Systematic Review on the Generation of Organic Structures through Additive Manufacturing Techniques;Polymers;2024-07-16