On the tribological behavior of retrieved hip femoral heads affected by metallic debris. A comparative investigation by stylus and optical profilometer for a new roughness measurement protocol-Reference-Cited by-同舟云学术

On the tribological behavior of retrieved hip femoral heads affected by metallic debris. A comparative investigation by stylus and optical profilometer for a new roughness measurement protocol

Published:2016-08 Issue: Volume:90 Page:365-371
ISSN:0263-2241
Container-title:Measurement
language:en
Short-container-title:Measurement

Author:

Merola Massimiliano,Ruggiero Alessandro^ORCID,De Mattia Jonathan Salvatore,Affatato Saverio

Publisher

Elsevier BV

Subject

Applied Mathematics,Electrical and Electronic Engineering,Condensed Matter Physics,Instrumentation

Reference39 articles.

1. Advanced biomaterials in hip joint arthroplasty. A review on polymer and ceramics composites as alternative bearings;Affatato;Compos. Part B Eng.,2015

2. Surface roughness of ceramic femoral heads after in vivo transfer of metal: correlation to polyethylene wear;Kim;J. Bone Joint Surg. Am.,2005

3. Clinical failure analysis of contemporary ceramic-on-ceramic total hip replacements;Brandt;Proc. Inst. Mech. Eng. Part H J. Eng. Med.,2013

4. Experimental in-vitro bone cements disintegration with ultrasonic pulsating water jet for revision arthroplasty;Hloch;Teh Vjesn – Tech Gaz,2015

5. Surface roughness of CoCr and ZrO2 FEMORAL HEADS WITH METAL TRANSFER: A RETRIEVAL AND WEAR SIMULATOR STUDY;Eberhardt;Int J Biomater,2009

Cited by 63 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. In-situ measurements of contact evolution for fractal rough surfaces under normal compression;International Journal of Solids and Structures;2024-07

2. Evaluation of High-Frequency Measurement Errors from Turned Surface Topography Data Using Machine Learning Methods;Materials;2024-03-22

3. Neosanding postprocessing for improving surface roughness of extrusion-based 3D printing of PLA parts: a comparative analysis of stylus profilometer and confocal profilometry methods;Journal of the Brazilian Society of Mechanical Sciences and Engineering;2024-03-19

4. Comparison of surface roughness parameters Ra/Sa and Rz/Sz with different measuring devices;Journal of the Mechanical Behavior of Biomedical Materials;2024-02

5. Evaluating surface roughness of curved surface with circular profile based on arithmetic circular arc fitting;AIP Advances;2023-12-01