Effect of post-process treatments on mechanical properties and surface characteristics of 3D printed short glass fiber reinforced PLA/TPU using the FDM process-Reference-Cited by-同舟云学术

Effect of post-process treatments on mechanical properties and surface characteristics of 3D printed short glass fiber reinforced PLA/TPU using the FDM process

Published:2023-04 Issue: Volume:41 Page:135-143
ISSN:1755-5817
Container-title:CIRP Journal of Manufacturing Science and Technology
language:en
Short-container-title:CIRP Journal of Manufacturing Science and Technology

Author:

Cao Lan,Xiao Jianhua,Kim Jin Kuk,Zhang Xiaojie

Funder

Nanchang Hangkong University

National Natural Science Foundation of China

Publisher

Elsevier BV

Subject

Industrial and Manufacturing Engineering

Reference51 articles.

1. Tensile, three-point bending and impact strength of 3D printed parts using PLA and recycled PLA filaments: a statistical investigation;Atakok;Journal of Materials Research and Technology,2022

2. Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing;Bhandari;Additive Manufacturing,2019

3. Development of rapid tooling using fused deposition modeling: a review;Boparai;Rapid Prototyping Journal,2016

4. Surface improvement of fused deposition modeling parts by barrel finishing;Boschetto;Rapid Prototyping Journal,2015

5. Investigating the effects of annealing on the mechanical properties of FFF-printed thermoplastics;Butt;Journal of Manufacturing and Materials Processing,2020

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. From prototyping to functional parts: A review of mechanical reinforcing procedures for polymeric parts fabricated via material extrusion;Journal of Manufacturing Processes;2024-11

2. The thermal properties of FDM printed polymeric materials: A review;Polymer Degradation and Stability;2024-10

3. Extreme roughness reduction and ultrafine quality of innovative dual function material extrusion 3D printer;Rapid Prototyping Journal;2024-07-16

4. Surface Finish Optimization of Vapor Smoothened PLA Fabricated Parts with Microstructural Analysis;Solid State Phenomena;2024-06-11

5. A review on the fused deposition modelling of fibre-reinforced polymer composites: Influence of process parameters, pre-processing and post processing techniques;Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications;2024-04-02