Response Surface Methodology and Artificial Neural Network modellings on hydraulic and thermal performances of a disk-shaped heat sink with tree-like microchannels-Reference-Cited by-同舟云学术

Response Surface Methodology and Artificial Neural Network modellings on hydraulic and thermal performances of a disk-shaped heat sink with tree-like microchannels

Published:2022-12 Issue: Volume:40 Page:102539
ISSN:2214-157X
Container-title:Case Studies in Thermal Engineering
language:en
Short-container-title:Case Studies in Thermal Engineering

Author:

Li Fangyuan,Kumar T. Ch. Anil,Elmasry Yasser,Singh Pradeep Kumar,Abed Azher M.,Algarni Abeer D.,Nguyen Van Nhanh,Wae-hayee Makatar,Phong Nguyen Phuoc Quy,Galal Ahmed M.^ORCID

Publisher

Elsevier BV

Subject

Fluid Flow and Transfer Processes,Engineering (miscellaneous)

Reference56 articles.

1. Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils;Wang;J. Clean. Prod.,2016

2. Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy;Zhang;J. Mater. Process. Technol.,2016

3. Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil;Li;J. Clean. Prod.,2017

4. Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling;Yang;Int. Commun. Heat Mass Tran.,2021

5. High-performance heat sinking for VLSI;Tuckerman;IEEE Electron. Device Lett.,1981

Cited by 10 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Artificial Neural Network analysis on the effect of mixed convection in triangular-shaped geometry using water-based Al2O3 nanofluid;PLOS ONE;2024-09-13

2. Multi-objective optimization and artificial neural network models for enhancing the overall performance of a microchannel heat sink with fins inspired Tesla valve profile;Case Studies in Thermal Engineering;2024-09

3. Liquid-cooled heat sink design methodology with technical and commercial viability considerations: Case study of a partially 3-D printed prototype;Applied Thermal Engineering;2024-06

4. Artificial neural network prediction and multi-objective genetic algorithm optimization of the microchannel heat sink with trapezoidal ribs;Thermal Science and Engineering Progress;2024-05

5. Bow-shaped vortex generators in finned-tube heat exchangers; ANN/GA-based hydrothermal/structural optimization;Case Studies in Thermal Engineering;2024-03