Author:
Smiri Badreddine,Saidi Faouzi,Maaref Hassen
Abstract
InAlAs alloy was grown by MOCVD on an InP (311) substrate with different polarities. Measurements of photoluminescence (PL) and photoreflectance (PR) were performed to study the impact of the V/III flux ratio. It is discovered that the PL line was shifted to a greater energy side with the increasing excitation power density, and no saturation was observed of its related PL intensity. It is a fingerprint of type II transition emission. However, the recombination of the type II interface showed a powerful dependence on AsH3 overpressure and substrate polarity. In fact, we have noted an opposite behavior of type II energy transition shift from A to B polarity substrate in respect to V/III ratio variation. PR signals corresponding to Franz-Keldysh Oscillation (FKO) were observed. The analysis of their period has allowed one to assess the value of the PZ field in the samples. PL-luminescence measurements were performed out as a function of temperature. PL peak energy, PL intensity, and half maximum full width show anomalous behaviors. Indicating the existence of localized carriers, they were ascribed to the energy potential modulation associated with the indium cluster formation and PZ field.
Reference41 articles.
1. Smiri B, Fraj I, Saidi F, Mghaïth R, Maaref H. Effect of piezoelectric field on type II transition in InAlAs/InP (311) alloys with different substrate polarity. Journal of Alloys and Compounds. 2018;736:29-34
2. Cornet C, Schliwa A, Even J, Doré F, Celebi C, Létoublon A, et al. Electronic and optical properties of InAs/InP quantum dots on InP(100) and InP(311)B substrates: Theory and experiment. Physical Review B. 2006;74:035312
3. Kawamura Y, Kamada A, Yoshimatsu K, Kobayashi H, Iwamura H, Inoue N. Photoluminescence study of interfaces between heavily doped AlInAs:Si layers and InP (Fe) substrates. Institute of Physics Conference Series. 1997;155:129
4. Yerino CD, Liang B, Huffaker DL, Simmonds J, Lee ML. Molecular beam epitaxy of lattice-matched InAlAs and InGaAs layers on InP (111) A, (111) B, and (110). Journal of Vacuum Science and Technology B. 2017;35:010801
5. Smiri B, Fraj I, Bouzidi M, Saidi F, Rebey A, Maaref H. Effect of V/III ratio on the optical properties of (311) A and (311) B oriented InAlAs/InP heterostructures. Results in Physics. 2019;12:2175-2182