Effect of annealing temperature on structure and stress properties of Ta2O5/SiO2 multilayer reflective coatings
-
Published:2019
Issue:11
Volume:68
Page:114208
-
ISSN:1000-3290
-
Container-title:Acta Physica Sinica
-
language:
-
Short-container-title:Acta Phys. Sin.
Author:
Liu Bao-Jian,Duan Wei-Bo,Li Da-Qi,Yu De-Ming,Chen Gang,Wang Tian-Hong,Liu Ding-Quan,
Abstract
In the optical system of spaceborne laser altimeter, dielectric mirror is an indispensable optical film element. Its surface shape quality directly affects the resolution and accuracy of distance measurement of the detection system. It is pressing and necessary to carry out research on the surface shape control technology of dielectric mirror to eliminate or reduce the effect of film stress on surface shape. The Ta<sub>2</sub>O<sub>5</sub>/SiO<sub>2</sub> multilayer reflective coatings are deposited on quartz substrates by using the ion beam assisted electron beam evaporation (IBE), and then annealed in air in a temperature range from 200 to 600 ℃. The effect of annealing temperature on the structure, optical and stress properties of Ta<sub>2</sub>O<sub>5</sub>/SiO<sub>2</sub> multilayer reflective coatings are systemically investigated by using x-ray diffraction, atomic force microscope, spectrophotometer and laser interferometer. The results show that all the Ta<sub>2</sub>O<sub>5</sub>/SiO<sub>2</sub> multilayer reflective coatings, after being annealed, are amorphous in structure. The annealing temperature has a great influence on the surface roughness of reflective coating. With the increase of annealing temperature, the surface roughness of reflective coating first decreases and then gradually increases, but is still smaller than that of as-deposited sample. After being annealed, the reflectance spectrum of reflective coating shifts slightly toward the long-wave direction, and the reflectivity increases a little. When being annealed at 500-600 ℃, the compressive stress of reflective coating could be transformed into tensile stress, and the surface is changed from convex to concave shape. It can be concluded that annealing at an appropriate temperature can effectively release residual stress of Ta<sub>2</sub>O<sub>5</sub>/SiO<sub>2</sub> multilayer reflective coating and eliminate the deformation of substrate caused by film stress, and thus improving the surface shape quality of dielectric mirror., After being annealed, the reflective coating still possesses the stable structure and spectral properties, so that dielectric mirror can meet the application requirements of spaceborne laser altimeter. In this paper, the experimental results are of great significance for applying the annealing technology to the surface shape control technology of dielectric mirrors.
Publisher
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Subject
General Physics and Astronomy
Reference21 articles.
1. Tang X M, Xie J F, Fu X K, Mo F, Li S N, Dou X H 2017 Acta Geod. Cartogr. Sin. 46 714 唐新明, 谢俊峰, 付兴科, 莫凡, 李少宁, 窦显辉 2017 测绘学报 46 714 2. Liu B, Zhang J, Lu M, Teng S H, Ma Y X, Zhang W G 2015 Laser Infr. 54 5104 刘斌, 张军, 鲁敏, 滕书华, 马燕新, 张文广 2015 激光与红外 54 5104 3. Liu H, Shu R, Hong G L, Zheng L, Ge Y, Hu Y H 2014 Acta Phys. Sin. 63 104214 刘豪, 舒嵘, 洪光烈, 郑龙, 葛烨, 胡以华 2014 物理学报 63 104214 4. Schiltz D, Patel D, Baumgarten C, Reagan B A, Rocca J J, Menoni C S 2017 Appl. Opt. 5 6 5. Kumar S, Shankar A, Kishore N, Mukherjee C, Kamparath R, Thakur S 2019 Optik 176 438
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|