Effect of Wall Heat Transfer on the Fluidization Process

Abstract

The fluidized bed and the fluidization process and characteristics were studied in this paper numerically using Computational Fluid Dynamics (CFD) Ansys Fluent 15.0. Constant temperature was applied to both sides of the two-dimensional fluidized bed geometry. The superficial velocity of the working fluid ranged amid (0.08 – 0.5 m/s) and the initial height of the solid particles changed amid (0.05, 0.1, 0.2 m). Aluminum particles and water was used as working materials within the fluidized bed. The model used for the investigations was validated using Ngoh and Lim research results. The results showed that the fluidization head increases as the water inlet superficial velocity increases. As well as when the water inlet superficial velocity increases, the average solid phase temperature increases.