Affiliation:
1. Lunghwa University of Science and Technology
Abstract
Abstract
Diamond-like carbon films with Ti dopant (Ti-DLC) are synthesized by reactive magnetron sputtering using a pure Ti metal target. This study determines the effect of methane flow ratios [Rm=CH4/(Ar + CH4), ranging from 4 to 12%] on the surface morphology, microstructure, mechanical properties and cermet cutting tool inserts features of Ti-DLC films. The GIXRD diffraction spectrum for Ti-DLC film depicts an amorphous structure. There are peaks for nano-crystalline TiC at 2θ values of 35.88o, 41.52o and 60.14o, which respectively correspond to the (111), (200) and (220) planes of the face centered cubic structure. The characteristic binding energy of C 1s, Ti 2p and O 1s for Ti-DLC film is determined using a high-resolution XPS spectra. Increasing Rm flow ratio (reducing Ti metal doping) increases the intensity of the Raman spectrum because there is an increased sp2-C (sp2/sp3 ratio) site fraction for DLC components. The experimental results show that the hardness of the DLC film increases from 11.07 GPa to 14.76 GPa as the Rm flow ratio is increased from 4% to 12%. The adhesive strength of the Ti-DLC film coating is measured using a scratch test and shows that the film adheres well to the substrate. The Ti-DLC films are coated onto cutter inserts for the dry milling of an Inconel 718 workpiece and the results show that all coated tools have a significantly longer tool life than uncoated tools.
Publisher
Research Square Platform LLC