Urea as a complexing agent for selective removal of Ta and Cu in sodium carbonate based alumina CMP slurry

Abstract

This work reports urea as a promising complexing agent in sodium carbonate (Na2CO3) based alumina slurry for chemical mechanical planarization (CMP) of tantalum (Ta) and copper (Cu). Ta and Cu were polished using Na2CO3 (1 wt.%) with alumina (2 wt.%) in the presence and absence of urea. The effect of slurry pH, urea concentration, applied downward pressure and platen rotational speed were deliberated and the outcomes were conveyed. Prior to the addition of urea, Ta removal rate (RR) was observed to enhance with pH from acidic to alkaline having maximum RR at pH 11. However, Cu RR decreases with increasing pH with minimum RR at pH 11. With the addition of urea in the slurry, Cu to Ta removal rate selectivity of nearly 1:1 is encountered at pH 11. The addition of urea boosts the Ta RR and suppresses Cu RR at the same time at 11 pH, as it adsorbs on the metal surface. Potentiodynamic polarization was conducted to determine the corrosion current (Icorr) and the corrosion potential (Ecorr). The electrochemical impedance spectroscopy (EIS) of both the metals was carried out in the proposed formulation and the obtained outcomes were elaborated.