Investigation of the Stiffness of a Specially Strengthened Bridge When Crossed by Very Heavy Vehicles

Investigation of the Stiffness of a Specially Strengthened Bridge When Crossed by Very Heavy Vehicles – A Case Study

Published:2024-03-25 Issue:1 Volume:19 Page:1-33
ISSN:1822-4288
Container-title:The Baltic Journal of Road and Bridge Engineering
language:
Short-container-title:BJRBE

Author:

Machelski Czesław^ORCID,Hildebrand Maciej^ORCID,Kliński Maksymilian^ORCID

Abstract

The measurement of bridge deflection induced by a motor vehicle is an effective way of verifying the weight of the vehicle, and even of determining the layout of its axles. If the vehicle’s weight and the impacts of its individual axles are known, deflection measurements can be used to verify the stiffness of the bridge structure and to evaluate the effectiveness of steel-concrete composite span integration. The bridge in this case study had been specially permanently adapted to carrying very heavy loads, generated by overweight transports reaching the total weight of a few to over 10 MN. The results of measurements of span deflections induced by a heavy vehicle and the way they were used to assess the weight of another overweight transport unit crossing the bridge are presented in the paper. The existing strengthening of the bridge has been found to be universal and effective for various overweight transports.

Publisher

Riga Technical University

Reference18 articles.

1. European Guidelines. (2006). European best practice guidelines for abnormal road transports. European Commission – Directorate-General for Energy and Transport. https://road-safety.transport.ec.europa.eu/system/ files/2021-07/abnormal_transport_guidelines_en.pdf

2. Gnap, J., Jagelčák, J., Marienka, P., Frančák, M., & Vojteková, M. (2022). Global assessment of bridge passage in relation to oversized and excessive transport: Case study intended for Slovakia. Applied Sciences, 12(4), Article 1931. https://doi.org/10.3390/app12041931

3. Godavarthy, R. P., Russell, E., & Landman, D. (2016). Using vehicle simulations to understand strategies for accommodating oversize, overweight vehicles at roundabouts. Transportation Research Part A: Policy and Practice, 87, 41–50. https://doi.org/10.1016/j.tra.2016.03.002

4. Hammada, A., Nims, D., Hunt, V., Commander, B., & Helmicki, A. (2013). Superload evaluation of the Millard Avenue Bridge over the CSX railroad. Proceedings of Transportation Research Board Annual Meeting, Washington, D.C., USA. https://www. researchgate. net/publication/257921554 _Superload_ Evaluation_of_the_Millard_Avenue_Bridge_over_the_CSX_Railroad

5. Helmi, K., Bakht, B., & Mufti, A. (2014). Accurate measurements of gross vehicle weight through bridge weigh-in-motion: A case study. Journal of Civil Structural Health Monitoring, 4, 195–208. https://doi.org/10.1007/s13349-014-0076-5