Abstract
The development of an economy and, in particular, the construction of new infrastructure as well as industrial enterprises creates demand for the road transport of oversized freight that exceeds the maximum permissible total mass of vehicle combinations with its share on the axles. Failure to comply with the defined technological processes and a deficiency in the assessment of permitting such forms of transportation can have a large adverse effect, predominantly on the lifetime of bridges in a road network, which can have international implications as well. There is no legislation adopted by the EU Member States, which would at least partially unify the authorisation procedures of these forms of transportation and, therefore, it results in problems when crossing borders and leads to differences related to the assessment of bridge passages. If there is no systematic inspection of this kind of transportation, it can lead to permanent damage of these bridges as well. Currently, and not only in Slovakia but also in other states, the assessment of bridge passage for certain routes is used for heavy and oversized transportation. It means that if we use 100 transports, 100 assessments of individual routes are needed, although some are the same routes or the same vehicles/vehicle combinations used for a number of transports. Thus, the authors designed a global assessment for bridge passage in relation to heavy and oversized road transport while verifying it in the conditions of the EU Member State from Central Europe–Slovakia. Roads are full of different types of vehicles/vehicle combinations for which the axle loads and distances of the axles (wheelbases) are important. Thus, there were vehicle/vehicle combinations parameters (big data) observed, for which the routes relating to heavy and/or oversized transportation were assessed from 1 January 2016 to 31 December 2020 in Slovakia. The global assessment of bridge passage introduces an entirely new approach within the procedure for obtaining a special permission for road use as well as within transport use itself. Given the low presence of freight with an abnormal axle load or enormous total mass, it is appropriate to define the limited conditions under which it would be possible to implement the global assessment in practice as well.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献