Comparison of Composite Curing Parameters: Effects of Light Source and Curing Mode on Conversion, Temperature Rise and Polymerization Shrinkage-Reference-Cited by-同舟云学术

Comparison of Composite Curing Parameters: Effects of Light Source and Curing Mode on Conversion, Temperature Rise and Polymerization Shrinkage

Published:2006-02-01 Issue:2 Volume:31 Page:219-226
ISSN:1559-2863
Container-title:Operative Dentistry
language:en
Short-container-title:

Author:

Tarle Z.¹,Knezevic A.²,Demoli N.³,Meniga A.⁴,Sutalo J.⁵,Unterbrink G.⁶,Ristic M.⁷,Pichler G.⁸

Affiliation:

1. *Zrinka Tarle, prof dr, Department of Dental Pathology, School of Dental Medicine, University of Zagreb, Zagreb, Croatia

2. Alena Knezevic, PhD, Department of Dental Pathology, School of Dental Medicine, University of Zagreb, Zagreb, Croatia

3. Nazif Demoli, PhD, Institute for Physic, Zagreb, Croatia

4. Andrej Meniga, prof dr, Department of Dental Pathology, School of Dental Medicine, University of Zagreb, Zagreb, Croatia

5. Jozo Sutalo, prof dr, Department of Dental Pathology, School of Dental Medicine, University of Zagreb, Zagreb, Croatia

6. Gary Unterbrink, DDS, Fuerst Johann Strasse 7, Principality of Liechtenstein

7. Mira Ristic, PhD, Institute Rudjer Boskovic, Zagreb, Croatia

8. Goran Pichler, PhD, Institute for Physic, Zagreb, Croatia

Abstract

Clinical Relevance The use of a low intensity light source for photopolymerization based on LED technology provides equivalent final degree conversion with possible flow of the resin composite, similar to when QTH technology is used. At the same time, the lower temperature rise in the sample and the more favorable development of shrinkage kinetics compared to the higher intensities of halogen light may aid in maintaining marginal adaptation while avoiding possible thermal injury.

Publisher

Operative Dentistry

Subject

General Dentistry

Link

http://meridian.allenpress.com/operative-dentistry/article-pdf/31/2/219/2152609/05-15.pdf

Cited by 48 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Absorption Spectra of Photoinitiators and the Graphical Analysis of Their Comparison;Journal of International Dental Sciences;2023-08-28

2. Effect of degree of conversion on the surface properties of polymerized resin cements used for luting glass fiber posts;The Journal of Prosthetic Dentistry;2023-08

3. Fast Curing with High-power Curing Lights Affects Depth of Cure and Post-gel Shrinkage and Increases Temperature in Bulk-fill Composites;Operative Dentistry;2022-11-28

4. Internal photo-activation of a dental composite using optical fibers: a holographic, thermographic and Raman study;Optical and Quantum Electronics;2022-10-22

5. Developments in resin-based composites;British Dental Journal;2022-05-13