A contribution to structural reliability analysis of composite high-pressure hydrogen storage tanks
Author:
Sid Amer Youcef1ORCID, Benammar Samir1ORCID, Fah Tee Kong2ORCID, Wadi Mohammed3ORCID, Jouda Mohammed S.3ORCID
Affiliation:
1. Université M’Hamed BOUGARA de Boumerdes (UMBB), Boumerdes 35000, Algeria Faculté de Technologie (FT) Laboratoire Energétique-Mécanique & Ingénieries (LEMI) 2. King Fahd University of Petroleum and Minerals Dhahran, 31261, Kingdom of Saudi Arabia 3. Istanbul Sabahattin Zaim University-IZU, Turkey
Abstract
Although composite high-pressure tanks are a subject of growing interest, especially for hydrogen storage applications, a detailed structural reliability analysis still needs to be improved. This work aims to provide a probabilistic investigation of the mechanical response of composite high-pressure hydrogen storage tanks using the Monte Carlo Simulation method. A performance function based on the circumferential model of composite pressure cylinders is employed with five random design variables. According to the results, the internal pressure and the helical layer thickness are the foremost parameters significantly impacting the structural reliability of the tank, whereas, the helical layer thickness and winding angles have a minor influence. In addition, high coefficients of variation values cause the contraction of the safety margin potentially leading to the failure of the composite hydrogen high-pressure tank. The obtained results were validated with experimental tests available in the literature
Publisher
Index Copernicus
Subject
Safety, Risk, Reliability and Quality
Reference17 articles.
1. A. Onder, O. Sayman, T. Dogan, and N. Tarakcioglu, “Burst failure load of composite pressure vessels,” Compos. Struct., vol. 89, no. 1, pp. 159–166, 2009, doi: 10.1016/j.compstruct.2008.06.021. 2. M. Azeem, H. Ya, M. Alam, M. Kumar, P. Stabla, M. Smolincki, L. Gemi, R. Khan, T. Ahmed, Q. Ma, M. Sadique, A. Mokhtar, “Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review,” J. Energy Storage, vol. 49, no. May, pp. 2021–2022, 2022, doi: 10.1016/j.est.2021.103468. 3. R. Hossain, J. P. Carey, and P. Mertiny, “Framework for a combined netting analysis and tsai-Wu-based design approach for braided and filament-wound composites,” J. Press. Vessel Technol. Trans. ASME, vol. 135, no. 3, pp. 1–7, 2013, doi: 10.1115/1.4023431. 4. L. Zu, S. Koussios, and A. Beukers, “Shape optimization of filament wound articulated pressure vessels based on non-geodesic trajectories,” Compos. Struct., vol. 92, no. 2, pp. 339–346, 2010, doi: 10.1016/j.compstruct.2009.08.013. 5. P. Francescato, A. Gillet, D. Leh, and P. Saffré, “Comparison of optimal design methods for type 3 high-pressure storage tanks,” Compos. Struct., vol. 94, no. 6, pp. 2087–2096, 2012, doi: 10.1016/j.compstruct.2012.01.018.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|