Thermally/mechanically robust anodic aluminum oxide (AAO) microheater platform for low power chemoresistive gas sensor

Abstract

Abstract The semiconductor metal oxide gas sensors are getting high attention owing to their high sensitivities and fast responses. They require high temperature for the reaction with target gases, and suspended silicon membrane microheaters are typically used to reduce the heating power consumption. However, they have low durability for long-term uses, and high probability of fracture by thermal stress or mechanical impact. In this study, as an alternative to the silicon membrane microheater, anodic aluminum oxide (AAO)-based microheater platform gas sensor was fabricated for low power consumption and high thermal/mechanical stabilities. Nanoscale air gaps of the AAO substrate reduce the heat loss transferred to the substrate. Therefore, AAO-based microheater platforms do not require suspended structures sustained by very thin bridges, which dramatically enhances thermal/mechanical stabilities. The temperature of fabricated microheater platform reached to 250 °C by a heating power of 27.4 mW. The excellent thermal/mechanical stabilities of the AAO-based microheater platforms were verified by cyclic on-off and mechanical shock test. The pulsed heating operation was adopted, and it reduced the heating power consumption to 9 mW. The fabricated AAO-based gas sensors showed much higher responses to NO2 gas compared to the SiO2 membrane-based gas sensors.