Author:
Chaichana Amornchai,Siripongdee Surapong,Jaikla Winai
Abstract
Abstract
In this design, the use of single commercially available integrated circuit (IC), LT1228 from Linear Technology Corporation, to implement the first order allpass filter is presented. The passband voltage gain of the presented first allpass filter (APF) is unit and constant throughout the operation frequency, while the phase response is electronically tuned by changing the external DC bias current. With this property, the proposed first order filter can be used as phase shifter with microcontroller controllability. Tuning phase property is not required any matching condition. The proposed phase shifter consists of one LT1228, one capacitor and two resistors which is attractive for off the shelf implementation. Moreover, the impedance at output voltage node is exhibit low which can connect to other circuit without the requirement of external voltage buffer. The expected performances of the proposed circuit are proved by Pspice simulation using macro model parameters. Also, the quadrature sinusoidal oscillator which is designed from the connecting of the proposed filter and integrator is chosen as application example.
Reference32 articles.
1. Multiple-input single-output universal biquad filter using single output operational transconductance amplifiers;Psychalinos;AEU – International Journal of Electronics and Communications,2018
2. New gain controllable resistor-less current-mode first order allpass filter and its application;Jaikla;Radioengineering,2012
3. Amplitude controllable current-mode first order allpass filter including minimum component count circuits;Chaichana,2015
4. On the realization of first-order current-mode AP/HP filter;Tangsrirat;Radioengineering,2013
5. Resistorless realization of current-mode first-order allpass filter using current differencing transconductance amplifiers;Tangsrirat;Microelectronics Journal,2010
Cited by
10 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献