Effect of Sn-addition on the properties of the biomedical Ti-17Nb-6Ta alloy.

Abstract

Abstract The effect of Sn-addition (0, 1.5, and 3 Sn, at.%) to the biomedical Ti-17Nb-6Ta alloy has been investigated in this study. The three alloys were proved using XRD analysis to be β-type alloys. Microstructural analysis using optical microscope showed martensite lathes in all alloys and proved that Sn addition stabilized β phase and suppresses the martensite formation during quenching. Micro-hardness results showed a slight increase with 1.5% Sn adding but superior addition of Sn with 3% at. has negligible effect on the hardness compared to Sn-free alloy. The compressive yield stress for the three alloys located between 400 to 500 MPa, and the stain values increased with the increasing of Sn percentages in the TNT alloy.